Coiltek’s CS-5000 puts the reliability and accuracy of ultrasonic sensing to work for
the specific purpose of slack loop control. This non-contact loop control system is built
into a stout steel stand so that the ultrasonic sensor is stationed directly over the
stock. By sensing the height of the stock, the CS-5000 controls the replenishment of
the loop by the feed device (straightener, decoiler, puller, etc.). Set up in ‘take-up’
mode, it can also control a downstream device, such as a rewind stand.
Super-easy Setup: Set up takes mere seconds with new push-button calibration. Can
also be set up using a computer via USB connection to the board.
Works with many different types of materials: Metals, Plastic Extrusions, Rubber,
Mesh products, Fabric, etc.
Multiple configurations available: 54, 72 and 86 inch tall stands, 11, 15, 21, 25, 30, 35,
39, 45 long booms.
Flexible: May be used very close to the sensor with control ranges from 14 inches to
Using free CSWin software, the control range may be as small as 1 inch and as large as
Useful feature set: Allows the user to tailor control to the application.
Multiple Program Set-ups: Up to eight distinct preset loop control profiles may be
stored. Allows multiple tailored loop control algorithms to be instantly employed as
required. Our 3CPO option allows quick operator control over three presets.
Two or more may be used in close proximity: Simple multiplex setup eliminates
For a more complete picture of the CS-5000's capabilities please see our
downloadable pamphlet or view the manual.
For more information on this or any other unit including up-to-date pricing, please
call us at (800) 883-7542 or use the form on our Contact Us Page linked at left.